Description
Blue Apple Thumper has added to its range an In line SOLAR REGULATOR
- rated to 10 Amps (180w).
This convenient 'handheld size' device will allow the user to regulate an unregulated solar panel(s) rated up to 180 watts.
The device is fitted with 2 x 50Amp Anderson connectors, each clearly labelled for 'Input from the solar panel' and 'Output to the battery'. Simply connect the unregulated solar panel to the Anderson labelled "Connect to solar" and connect the remaining Anderson labelled "Connect to Battery" to the battery feed.
Supporting yet another Australian made product, the Thumper In-Line-Solar-Regulator is fitted internally with a GSL 10Amp PWM regulator. The regulator is designed to suit all types of battery chemistry ranging from Gel, AGM and even Wetcell with a peak voltage charge of 14.2Volts (see specs below for more information)
The CB-AVS is additional fitted with an LED Amp + Volt meter, making it even easier to keep a close eye on what amperage your panels are producing along with monitoring the current voltage of your battery's condition.
The Amp meter component of this gauge (bottom line of the gauge) is rated to 10Amps and is completely over-load protected.
This meter provides an accurate voltage reading measured to one decimal place; designed to be left on continuously if so desired, the meter has an extremely low power draw of just 9mA from the battery per hour, which is an approx draw of less than .5 amp for a full week's use!
12.7 Volts = 100 % Battery capacity remaining
12.5 Volts = 80 % Battery capacity remaining
12.2 Volts = 50 % Battery capacity remaining
11.3 Volts = 30 % Battery capacity remaining
10.5 Volts = FLAT - Battery requires immediate recharge
- rated to 10 Amps (180w).
This convenient 'handheld size' device will allow the user to regulate an unregulated solar panel(s) rated up to 180 watts.
The device is fitted with 2 x 50Amp Anderson connectors, each clearly labelled for 'Input from the solar panel' and 'Output to the battery'. Simply connect the unregulated solar panel to the Anderson labelled "Connect to solar" and connect the remaining Anderson labelled "Connect to Battery" to the battery feed.
Supporting yet another Australian made product, the Thumper In-Line-Solar-Regulator is fitted internally with a GSL 10Amp PWM regulator. The regulator is designed to suit all types of battery chemistry ranging from Gel, AGM and even Wetcell with a peak voltage charge of 14.2Volts (see specs below for more information)
The CB-AVS is additional fitted with an LED Amp + Volt meter, making it even easier to keep a close eye on what amperage your panels are producing along with monitoring the current voltage of your battery's condition.
The Amp meter component of this gauge (bottom line of the gauge) is rated to 10Amps and is completely over-load protected.
This meter provides an accurate voltage reading measured to one decimal place; designed to be left on continuously if so desired, the meter has an extremely low power draw of just 9mA from the battery per hour, which is an approx draw of less than .5 amp for a full week's use!
12.7 Volts = 100 % Battery capacity remaining
12.5 Volts = 80 % Battery capacity remaining
12.2 Volts = 50 % Battery capacity remaining
11.3 Volts = 30 % Battery capacity remaining
10.5 Volts = FLAT - Battery requires immediate recharge
Specifications:
PRODUCT DETAILS -
PRODUCT DETAILS -
|
Part No:
Charge type Input voltage range Max current at Bulk charge Max Charge voltage Float voltage Max operating temperature Typical Efficiency Power Draw p/hr Over-temperature protection Dimensions Weight LED Light status |
CB-AVS
3 Stage PWM Charge 15V - 25V 10 Amps 14.4 Volt (often 14.2V) 13.5 Volts 70*C 98% 0.05Amp Yes 1550mm (H) x 99mm (W) x 54mm (D) 210grams SOLID ON: Battery charging & Battery > 13Volts Flashing: Nighttime - Battery OK Daytime - Battery low or panel disconnected Blinking: Battery level very low |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.