EX-DISPLAY | Thumper 'Elite' 110 AH Battery Pack (Dual Battery) | In vehicle battery isolator

Save 34%

Price:
Sale price$759 Regular price$1,149

Description

1  x EX-DISPLAY UNIT (Unit was on display in the showroom)
The unique battery pack offers an INTERNAL isolator built within the unit, which will eliminate the need to install an under bonnet isolator in your vehicle for charging.  

The Thumper Elite 110 AH offers the largest capacity of Amp hours available in the Thumper series.

Perfect for the use of running a large 80Lt – 100Lt compressor type fridge while away from power over a long weekend. The 110 AH is not only a great means of battery storage but again it offers over 1000 cranking amps for a spike protected jump – start suitable for vehicles up to and including 10Lt diesel models.

 

Elite 110 AH includes:
2 Marine grade Cigarette sockets - rated to 16 Amps
1 Dual USB socket - rated 2.2A min at 5 volts
1 Engel Fridge (unique 2 pong socket) - rated 15 Amps
1 Merit / Hella socket - rated to 15 Amps
1
50 Amp bi-directional Anderson connectors
1 Designated 50 Amp Anderson for vehicle charge
1 175 Amp Anderson connector
1 Digital Volt meter for accurate battery reading
1 Internal circuit breaker protection


The Thumper Elite has been designed to run perfectly within vehicles with voltage sensitive alternators, or even low alternator outputs (suited for vehicles up to 2016 and prior). Vehicles dated after 2017 will most likely require the use of a DC charger - please see our Thumper Outback or Lithium range of battery packs.

The Elite:
Simply run a 6mm / 8mm charge lead (supplied) through the vehicle to the location of your Thumper ELITE with an in line fuse/circuit breaker and your job is done! 

 

The Elite will isolate itself completely from the main cranking battery without the need of installing an additional under bonnet isolator to the vehicle. This feature is a perfect option for company vehicles or newer vehicles where it is difficult to locate or link into an ignition activated source.

 
The unit is completely spike protected to ensure no damage will occur during jump – starting due to voltage spikes. The unit comes equipped with a LCD digital display meter for accurate voltage readings.

The Thumper Elite 110 AH includes: 
1 x Set of heavy duty jump leads
1 x Vehicle wiring loom (E-Kit)

 

Specifications:
Model No. E-110
Weight 30 KG
Length 340 mm
Width: 265 mm
Height: 305 mm
Warranty: 2 Years


 

FEATURES:

·       DUAL USB

 The Thumper Elite is fitted with 1 x Dual USB outlet rated to min 2.2Amps at 5Volts. This socket will allow for fast recharge of any USB compatible appliances. Please note: The USB will only be powered when the volt meter gauge is on.

·       ENGEL FRIDGE OUTLET 

The Thumper Elite is fitted with an Engel Fridge socket. 

Whilst the Engel socket is designed primarily for Engel fridges due to the 2prong connection, this plug is now readily available on the market and can be used to adapt your existing appliance or fridge in order to utilize this connection. The Engel socket can be used as both an inlet or an outlet and is rated to approx 15Amp at 12V.



THE BEST FEATURE YET!

·       “50AMP VEHICLE CHARGE ONLY” ANDERSON – Fitted with In built isolator – rated to 50Amps

This 50Amp Anderson connector is linked to its very own internal isolator, built inside the Thumper Elite itself!

This outlet will allow you to connect a charge line through the vehicle, directly off the main battery with nothing but a circuit breaker in the line – The Elite will isolate itself completely without the need of installing an additional isolator to the vehicle. This feature is a perfect option for company vehicles or newer vehicles where it is difficult to locate or link into an ignition activated source.

The Elite will have a disconnect voltage of approx 12.7 Volts – it is at this point that the Elite will isolate itself from the charging source.

The  reconnect voltage of the Elite is approx 13.2Volts – making it the perfect companion for the newer vehicles with low alternator voltage or voltage sensitive alternators.

The “50Amp Vehicle charge only” line can be used with a DC charger if required, however, we have found with experience that many vehicles up to 2016 do not require the use of DC Chargers.


·       50AMP INPUT / OUTPUT ANDERSON

This 50Amp Anderson can be used to directly link the Elite to another battery without isolation. The line will provide a continuous link to whatever it is connected to. This connection will allow you the option to parallel link batteries to allow them to charge and discharge together as one. This connection may be used for running all accessories such as fridges, lighting, air compressors and anything 12 Volt.


 

Thumper Redback 110 AH - R.R.P $ 1,149.00

BUILT IN AUSTRALIA BY BLUE APPLE


_________

Payment & Security

Apple Pay Generic Google Pay Mastercard PayPal Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed