The Link Hub is designed in two models in both 100 AH and 120 AH capacity, to include an option with and without sockets. The Link Hub simply 'BINDS' with the Master Hub to increase both Amp Hour capacity and discharge capacity to offer the ability to run larger discharge appliances for a longer duration.
No problem! Thumper now offer a simple solution of a Thumper Battery Link Hub.
Link to 100 AH or 120 AH
The Thumper Lithium Battery Hub can be linked to either a 100 AH or 120 AH Link Hub, and you can even link a 100 AH with a 120 AH!
Monitor via Bluetooth APP
The Bluetooth App will allow the option to reset the total Amp Hour capacity to monitor both Hub's together, or instead, the user can continue to monitor each battery separately.
The App will provides the ability to either run both Hub's in parallel with one another, equally sharing the discharge or charge load between the two, or, instead the user may choose to keep the Thumper Link Hub as a reserve battery and activate it only when they wish to start using. All of this and more is available from the FREE Bluetooth App!
This particular model Link Hub is designed without sockets and is designed to be charged and maintained through the use of any of the Thumper Battery Master Hub's.
AH capacity - Including remaining AH & AH consumed
Total cell balancing
High cell voltage
Low cell voltage
Cell voltage difference
Monitoring of dual battery sensors
Ability to parallel link and re-program AH capacity
Thumper offer a number of videos to help explain in more detail the operation of the Bluetooth App, however, a few key points are covered in this listing (videos to be uploaded soon).
For any technical advice regarding the App, we recommending contacting our team direct directly.
Bluetooth App | Home screen - explained:
Bluetooth App | Control Screen - Explained:
The Bluetooth app offers the ability to control the charge or discharge loads from the battery by remotely switching ON / OFF the power via the Bluetooth App.
Simply go into the CONTROL panel of your Bluetooth App and press:
CHARGE SWITCH - to remotely disconnect all charge loads from the battery. Turning this particular switch OFF will prevent the battery from taking a charge load from any charging source.
DISCHARGE SWITCH - to remotely disconnect all discharge loads from the battery. Turning this particular switch OFF will prevent the battery from running any appliance as it disconnects all loads from the battery. This is the perfect option to use when storing the battery.
Check out a small video on the introduction of the Thumper Lithium Battery Hub:
The Thumper Lithium Battery Hub contains Lithium Phosphate LiFePO4 Prismatic cells. The battery holds a 5 year manufacturing warranty and is designed as the ideal option as a independent dual battery system.
Maintenance free & Internally Protected
The Thumper Lithium Battery Hub uses extremely safe and virtually maintenance free technology. The battery is internally secured for protection in harsh off-road conditions and has been designed with thermal stability protection, over voltage protection, under voltage protection and internal short circuit protection.
The battery is protected with dual temperature sensors on both the individual battery cells and the Battery Management System (BMS), both of which are easily monitored via a FREE downloadable Bluetooth App.
Bluetooth Monitoring
Monitoring the charge condition of the Battery Hub is an easy process through the Bluetooth App.
Not into apps? No problem, simply use the digital voltage meter fitted to the battery for a guide on the battery charge condition.
Voltage meter
The Thumper Battery Hub is considered to be fully charged when the battery meter is reading approx. 13.4 Volts and the LED bar graph around the voltage display illuminates with a minimum of three green bars.
Interested in the internal construction of the battery? Thumper lift the lid on our batteries to show you the quality of the cells, BMS and overall construction.
Battery capacity, Maximum discharge and connection points
The Thumper Lithium Battery Link Hub with sockets offers 120 AH of usable battery power and is fitted internally with a ‘Battery Management System’ (BMS) rated to 120 Amps.
The 120 Amp BMS is equal to approx. 1440 watts of power. This refers to the maximum discharge capacity the battery can release to run heavy appliances such as Inverters, air compressors, etc. The maximum draw on the Thumper Lithium 120 AH Battery Hub is 1440 watts.
Larger output requirements, exceeding 50 Amps but limited to 120 Amps, it is recommended to use one of the two 120 Amp Anderson connectors fitted to the top of the Battery Link Hub
240 Volt battery charger: Not included with the LINK HUB model
Vehicle wiring loom: Not included with the LINK HUB model
Mounting Tray: Included in the package is a complete mounting tray and stray for secure mounting of the Thumper Lithium Battery Hub.
Common questions and answers:
1. Can I run my appliances and charge the battery at the same time?
Yes! Absolutely. This is the best way you can use the battery system. The battery is able to safely charge (via the vehicle, 240 volt battery charger, or solar), whilst running your 12 volt accessories.
2. How long will the 240 volt battery charger take to charge my power hub?
If the battery is completely discharged, then the battery charger (provided) can take up to 10 hours to completely recharge the battery hub. Keep in mind that the battery hub does not need to be flat before you recharge your battery
3. Can I add a DC Battery Charger to this pack?
Lithium batteries will charge best in the vehicle when coupled with a suitable DC Battery charger. Thumper do offer two model Battery Hubs with the DC charger fully fitted and hardwired to the unit; Redarc and Projecta.
If you own a DC Charger already, then it is no problem to use this to charge the Thumper power Hub, providing it has a Lithium setting (or an AGM setting that falls within an appropriate voltage range). Simply connect your existing DC charger to one of the Anderson connectors fitted on the Battery Hub.
4. Can I link another battery for increased capacity?
Yes! Thumper offer a battery LINK HUB that is designed for this sole purpose of linking the two hub's together. The linking hub is fitted with a 120 Amp Anderson connector and will allow you to parallel link the two Battery Hub's so to increase both the overall capacity as well as the BMS rating (2 x 120 battery hubs = 240 Amp BMS / 2880 watt capacity)
If you are not wanting to link to the Thumper Linking Hub, then the other option would be to link to a TL-120P model (via 120 Amp Anderson on the Hub to ring terminals on the battery). This would provide the same effect on the increase capacity.
5. What is the warranty on the Thumper Lithium Battery Hub?
The warranty on the Thumper Lithium Battery Hub is 5 years from date of purchase.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Estimate shipping
Refund Policy
Home of 12 volt does not offer refunds for 'simple change of mind'
Returns must be made within 7 days of purchase when looking for a refund
Returns for refund: items must be in brand new condition and in original packaging where possible
Home of 12 Volt reserve the right to determine if a product has been misused or neglected and therefore refuse a refund under these terms
Home of 12 volt is not responsible for any freights cost or damages that may be incurred with relation to return items
Home of 12 Volt will repair or replace the item if faulty and the unit will be returned to you as the customer at the expense of Home of 12 Volt. (Return postage for customer to Home of 12 Volt is borne by the customer).
If refunds are approved, they will be processed via the same method as the original payment (and processed via the website portal)
We suggest to contact our team on 08 8391 3121 to first discuss any return items prior to sending