Thumper Outback DC Battery Pack | Suits Smart Alternators
Thumper Outback 80 AH & 110 AH
Available in two sizes (80 AH and 110 AH), the Thumper Outback DC now incorporates the use of a sophisticated DC charger for both vehicle and solar charge.
The Thumper Outback DC unit is fitted with the Projecta IDC25.
This particular DC charger is designed to allow for an optimal input charge to be harnessed from the use of both newer and older model vehicles as well as an unregulated 12volt solar panel. The Projecta IDC25 is hardwired into the Thumper unit using internal circuit breaker protection and heat sync protection, resulting in a portable battery system which is as simple as 'plug and play'!
But wait! .. There's more!
The Thumper Outback DC is fitted internally with a Bluetooth monitoring device.
This exciting new component of the Thumper allows for you to monitor your Thumper’s stage of charge via a FREE downloadable app via the use of a smart device (available from your iTunes or google Play store).
- Portable and affordable in comparison to a under bonnet dual battery system!
|
|
Thumper meets the Projecta IDC25 DC Battery Charger
The new range of Thumper Outback DC units unit are fitted with the latest technology in DC charging; The Projecta IDC25. This particular DC charger is designed to allow for an optimal input charge to be harnessed from the use of both newer and older model vehicles as well as unregulated 12 volt solar panels. The Projecta IDC25 has been hardwired to the Thumper with internal circuit breaker protection and heat sync protection.
The IDC25 used on the Thumper Outback DC is designed to alter the initial voltage of your vehicle’s alternator output (input voltage 9-32Volts) in order to produce the voltage selected via the mode setting on the IDC25 (for example: selecting the mode to GEL setting will allow for the charging voltage of approx. 14.2 Volts when charging and a float voltage
of 13.8 Volts).
As the input charge to the DC allows for voltages between 9-32Volts, the Thumper Outback DC is now compatible to charge from 24 volt vehicles! The DC charger will operate like a step down converter, dropping an input voltage of 32 volts down to your selected chemistry (eg. Gel = 14.2 Volts).
The IDC25 unit offers a MPPT Solar Regulator rated to 25 Amps. The regulator has been hardwired into your Thumper Outback DC unit via an independent 50 Amp Anderson connector labelled ‘Unregulated solar input’. This outlet has been designed solely for the use of an unregulated solar panel (approx. input capacity 400-450 watts).
The Thumper Outback DC is fitted internally with a Bluetooth monitoring device. This exciting new component of the Thumper unit allows the user to monitor the Thumper’s stage of charge via a FREE downloadable app (available from the iTunes or google play store).
The Bluetooth battery monitoring app has been designed around the parameters of a fridge operating voltages.
The Bluetooth monitoring app provides a number of different parameters that the user may choose to monitor, from vehicle input charge, voltage history graph (the information will remain stored in the Bluetooth app for a period of 35 days), cranking tests and more.
3 x Cigarette sockets
1 x Merit type socket 1 x Dual USB socket 1 x 50Amp Anderson for Solar input 1 x 50Amp Anderson for Alternator input |
1 x Engel Fridge socket
1 x Digital Volt meter 1 x 175 Amp Anderson 2 x 50Amp Inlet / Outlet Anderson connector (wired bi-directional) |